Input Characteristics
Operating Input RangeMinimum : 110VAC, Nominal : 230VAC &
Maximum : 300VAC
Input Frequency50Hz to 60Hz
Input Current< 1000mA rms @ 110VAC
Efficiency> 75% at all load conditions with complete AC
input Operating Voltage (110VAC - 300VAC).
Inrush Current< 50A Peak @ 230VAC Cold start at 25 Deg.
Output Characteristics
Output Voltage12.0 VDC
Output Current Each Channel 1.0A Load.
Line & Load Regulation 11.40 - 12.60VDC.
Ripple < 240mV
Noise< 480mV (measured with 0.1μF ceramic disc &
10μF EL Capacitor across the output terminals)
Hold Up Time> 10 mSec. at 110VAC Input.
Turn-on Delay< 3.0 Sec. at 230VAC input.​
Rise & Fall Time< 10 mSec. at 230VAC input​
Output Power Limit< 50.0W Ma
Output Overshoot< 10% of output voltage at all the conditions of input voltage.
Output VoltageSwitch at Normal: 12 - 13V, Medium: 13 - 14.5V and Switch at Long: 14.5 - 15.5V.
Output Over Load / Short Circuit Protectionyes
Input Over Voltage Protectionyes​
Over Temperature Protection yes
TemperatureOperation: 0ºC to +50ºC.
Storage: -15ºC to +70ºC ambient.
HumidityOperation: 10% RH to 90% RH non-condensing.
Storage: 5% RH to 95% RH non-condensing.
MTBF> 50,000 hours at full load
AC InputThrough an 2-Pin Integrated Plug​
DC OutputPCB Mountable connector with 4 parallel outputs​
MaterialABS Plastic, UL94.V-0, RAL9023 Pearl dark gray color.
DimensionsL = 142.5 mm. W = 70.0 mm. H = 37.0 mm.
WeightAprox. 200 Grams under packed condition.
AC Pin MaterialBrass with Nickel plated.
Marking InformationLaser Marking on the front side of the enclosure.
IndicationsGREEN led provided to indicate output ON for each channel.